NFL new chip breaker for finishing of soft and gummy materials
	This new developed chip breaker for finishing of soft and gummy material. Due to his very sharp and waved cutting edge he enables good ship control in high speed machining,short chips, low cuting force and long tool life at machining of e.g. deep-drawing sheet metal.NFL chip breaker best solution at finishing oeration.

NLU chip breaker for finishing
	This new developed chip breaker offers best chip control at low cutting feed and low depth of cut. Improved chip control in radius forming out facing or copying operation and a stable process are now possible. The new designed sharp and waved cutting edge performs short chips. For higher productivity or much better surface quality this chip breaker is also available with "Wiper" .

NGUW & NLUW Wiper inserts
	This designed chipbreaker with integrated wiper technology, increasing feed rate and boosts productivity. Use type NLUW for light cuts and NGUW for medium cuts. Also available without wiper as NGU and NLU typ.

T3000Z new cermet grade also for interrupted cut
	T3000Z new coated cermet grade for general machining of steel up to interrupted cut. A new special tough substrate in combination with high wear resistance ZX coating enable long tool life and excellent constant surface quality.

AC900G new developed carbide grade for steel and cast iron
	This new ACE-coated Premium-grade AC900G is suitable for cast iron with heavy interrupted cut and for steel turning with highcutting speed or interrupted cut. Extrem tough substrate and special developed coating achieve a high fracture and wearresistance. Available in all current geometries this grade is a ultimative solution for many application.

AC700G multigrade for steel and cast iron
	AC700G CVD coated multigrade for steel and cast iron. New developed combination of thick TiCN and Al2O3 layer for high wear and oxidation resistance . AC700G application field from ISO P05-P10 for steel and K10 for cast iron material. Usable for continuous and light interrupted cut also under dry condition.

AC2000 and AC3000 for machining of steel
	Zirconium coated substrate with excellent thermal resistance and tough fine grain for best toughness and high wear resistance.AC2000 main grade for machining of steelAC3000 very tough grade for strong interrupted cutting and rough machining of steel