New square solid endmill for harden steel machining. GSH type has optimum design for high rigidity and excellent chip evacuation. Newly developed ultra fine corn carbide substrate has improved wear resistance and micro chipping resistance. New "GS Hard" coating has enhanced cutting speed capability.
Untitled Document
Face milling cutter RM typ for solid CBN inserts BNS800
New corner milling cutter for high speed rough and finish machining of cast iron using BNS800 solid CBN inserts, can offer economical solution for cast iron milling. 8 cutting edges can be used by SNGN style insert, which has also possibility to regrind once and adjusted properly.
Untitled Document
Small diameter milling cutter SRF typ for Aluminum machining
Series for RF milling cutter has been expanded for smaller size, which can be used on smaller size machine or machining small parts. Inserts are clamped by screw directly to the cutter body and this makes possible maximum rotation of 20000 rev/min.
Untitled Document
New shoulder milling cutter CNP typ
CNP shoulder milling cutter with newly developed tangential insert. It can provide extremely high productivity of 2.000 mm/min machining feed in shoulder milling operation, and excellent machined surface quality and squareness an well.
Untitled Document
WGC face milling cutter
Designed for face milling operations which require a cutter capabile of high cutting performance, low cutting forces and excellent surface finish. WGC3000 and WGC4000 cutter serie is the optimum solution. Available in coarse and fine pitch, these cutters utilise low cost SEMT inserts size 09 and 13 available with three different styles of chip breaker for steels, cast irons, aluminium and stainless steels.
Untitled Document
Metal Slash MS-Serie for milling with high feed rate
The new Metal Slash Cutter Serie from diameter 50mmm to 125mm with high cutting capacity and low cutting force for machining of steel, die steel and cast iron. Depending to the operation feed rate of 2mm/teeth and depth of cut of max. 2mm in face milling or ramping operation is possible. Economical 4 cutting edges usage with optimized geometry for efficient milling.
Untitled Document
GS-Mill new end mill serie
High Speed and high accurate machining by new rigid substrate. The new PVD coated grade ACZ20W has a very smooth surface which brings excellent chip evacuation capability, chipping, adhesion and wear resistance. Available as square typ with 2 und 4 teeth, GLM2000 and GLM 4000 Serie, and ballnose typ form Ø 0,5 to 12 mm, GLB2000 Serie. Wide application range: Carbon steel, alloy steel, pre-harden steel, annealed steel, harden steel, stainless steel, exotic material and cast iron.
