• P
  • M
  • K
  • N
  • S
  • H

GND Grooving System

High precision grooving tool holders

  • Applicable for grooving, turning, profiling, facing, necking, internal grooving and cut-off
  • Grooving insert width tolerance of ±0,03mm over the entire range
  • Grooving width from 1,25mm - 8,0mm
  • 30% reduced vibration compared with conventional types
  • 10 different chipbreakers achieve outstanding chip control
  • New DIN shank types with inner coolant supply

Latest expansions of GND series

GND with internal coolant

The GND grooving system has been expanded to include DIN shanks with internal coolant supply. The two targeted coolant outlets ensure optimum cooling and lubrication of the cutting zone. In addition to the further improved chip control, the achievable tool life is also further increased.

CF Type Chipbreaker

Newly developed chipbreakers with front cutting angles 10°/15° for cut-off machining now available. The asymmetric chipbreaker design achieves an outstanding chip control even on inserts with front cutting angles where chip control is typically difficult.

GNDIS Type

GNDIS Type is suitable for grooving of small bores with minimum bore diameters from 14mm. Reduces vibration during grooving by employing the same high-rigidity holder design of the GND series. Uses special 2-cornered inserts (GXM type).

Productvideo

Tooling News

GND Grooving System

High precision grooving tool holders

E-154
Array
(
    [0] => Array
        (
            [title] => AC8000P Grades
            [alias] => ac8000pgrades
            [id] => 34
            [tstamp] => 1666956711
            [stop] => 
            [start] => 
            [invisible] => 
            [language] => en
            [fallback] => 33
            [materialproperties] => P
            [productteasertext] => 

AC8015P AC8020P AC8025P AC8035P Coated Carbide Grades

[productteaserimg] => KV> [youtubevideoid] => gW2jBPgZ5rk [productcatalogname] => AC8000P Grades [productcatalogfile] => > [productcatalogthumb] => ʂ$> [productcatalogshortdesc] =>

Coated Carbide Grades

[productcatalogdid] => E-166 [productexamplefirst_name] => [productexamplefirst_img] => [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

Coated Carbide Grades

Features

  • Absotech Platinum Technology
  • Excellent stability
  • Reliable processes
  • Excellent wear resistance
[category] => turning [productdescimg] => nQV> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => AC8000MP Coated Carbide Grades [productexamplethird_name] => [productexamplethird_img] => ) [1] => Array ( [title] => AC5000S Grades [alias] => ac5000s-grades [id] => 26 [tstamp] => 1672740256 [stop] => [start] => [invisible] => [language] => en [fallback] => 25 [materialproperties] => P,M,K,S,H [productteasertext] =>

AC5005S, AC5015S und AC5025S Coated Grades for exotic alloys

[productteaserimg] => T> [youtubevideoid] => An0AO13CTlA [productcatalogname] => AC5000S Grades [productcatalogfile] => Ӽ4> [productcatalogthumb] => " > [productcatalogshortdesc] =>

Our New Grades for Exotic Alloy Turning

[productcatalogdid] => E-147 [productexamplefirst_name] => +433% Tool life [productexamplefirst_img] => ԵɳMw> [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

Coated Grades for exotic alloys

AC5005S, AC5015S and AC5025S - Our New Grades for Exotic Alloy Turning, Creating „Absolutely Stable Cutting“.

  • High efficiency with a newly developed dedicated substrate with excellent high-temperature hardness.
  • Realises excellent wear resistance and plastic deformation resistance during machining.
  • With AC5005S the deformation at high temperatures goes 50% down from conventional grade.
[category] => turning [productdescimg] => T> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => AC5005S, AC5015S and AC5025S Grades for Exotic Alloy Turning, [productexamplethird_name] => [productexamplethird_img] => ) [2] => Array ( [title] => T1500Z Cermet Grade [alias] => t1500z-cermet-grade [id] => 46 [tstamp] => 1679579711 [stop] => [start] => [invisible] => [language] => en [fallback] => 45 [materialproperties] => P [productteasertext] =>

Coated cermet grade for steel turning

[productteaserimg] => ,u*fT]> [youtubevideoid] => [productcatalogname] => T1500Z/T2500Z Cermet Grade [productcatalogfile] => wJʤO [productcatalogthumb] => MY> [productcatalogshortdesc] =>

Coated cermet grades for steel turning

[productcatalogdid] => E-157 [productexamplefirst_name] => [productexamplefirst_img] => [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

General purpose coated cermet for steel turning

PVD coating process "Brilliant Coat" for glossy finished surface with excellent adhesion resistance. A general purpose coated cermet grade capable of maintaining high-quality finished surfaces while providing excellent wear resistance.

  • PVD coating process ,,Brilliant Coat"
  • Excellent wear resistance and fracture resistance
  • Low reactivity with work materials for beautiful finished surfaces
[category] => turning [productdescimg] => ΪT\> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => T1500Z Grade [productexamplethird_name] => [productexamplethird_img] => ) [3] => Array ( [title] => AC1030U Grade [alias] => ac1030u-grade [id] => 3 [tstamp] => 1679564268 [stop] => [start] => [invisible] => [language] => en [fallback] => 2 [materialproperties] => P,M,K,N [productteasertext] =>

Coated grade for high precision small parts turning

[productteaserimg] => (CT]> [youtubevideoid] => 0H4u8gyo17k [productcatalogname] => AC1030U [productcatalogfile] => LʤO [productcatalogthumb] => "LʤO [productcatalogshortdesc] =>

Coated grade for high precision small parts turning

[productcatalogdid] => E-143 [productexamplefirst_name] => +50% Tool life [productexamplefirst_img] => R!?w> [productexamplesecond_name] => +50% Tool life [productexamplesecond_img] => ;^?w> [productdescription] =>

Coated grade for high precision small parts turning

  • PVD coating „Absotech Bronze“ and special substrate are applied
  • High quality cutting edge realizes excellent resistance against adhesion and micro chipping
  • Excellent surface finish quality
  • High performance turning of small precision parts
  • Suitable for small inner diameter grooving applications
[category] => turning [productdescimg] => k$> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => Coated grade for high precision small parts turning [productexamplethird_name] => [productexamplethird_img] => ) [4] => Array ( [title] => T2500Z Cermet Grade [alias] => t2500z-cermet-grade [id] => 51 [tstamp] => 1667212560 [stop] => [start] => [invisible] => [language] => en [fallback] => 49 [materialproperties] => P [productteasertext] =>

Coated Cermet Grade T2500Z for steel turning

[productteaserimg] => ,TT]> [youtubevideoid] => m5YX7sToti4 [productcatalogname] => T1500Z/T2500Z Grade [productcatalogfile] => wJʤO [productcatalogthumb] => MY> [productcatalogshortdesc] =>

Coated cermet grades for steel turning

[productcatalogdid] => E-157 [productexamplefirst_name] => [productexamplefirst_img] => [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

Coated Cermet Grade T2500Z for steel turning

The coated cermet grade T2500Z for steel turning achieves longer and reliable tool life thanks to excellent resistance of notch wear and adhesion fracture.

  • Improved notch wear resistance by Brilliant Coat
  • Improved heat resistance by higher toughness
  • Stable, long tool life with excellent surface quality
[category] => turning [productdescimg] => T'T\> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => Coated cermet grades for steel turning [productexamplethird_name] => [productexamplethird_img] => ) [5] => Array ( [title] => T1500A/T1000A Cermet Grades [alias] => t1500a-t1000a-cermet-grades [id] => 42 [tstamp] => 1679583716 [stop] => [start] => [invisible] => [language] => en [fallback] => 41 [materialproperties] => P,K [productteasertext] =>

Uncoated Cermet Grades

[productteaserimg] => [2ɋw> [youtubevideoid] => [productcatalogname] => T1000A / T1500A Grades [productcatalogfile] => s> [productcatalogthumb] => Hϕ> [productcatalogshortdesc] =>

Uncoated Cermet Grades

[productcatalogdid] => E-126 [productexamplefirst_name] => [productexamplefirst_img] => [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

Uncoated Cermet Grades

T1500A is a general purpose uncoated cermet that provides stable finish quality in finishing and medium cutting. This cermet grade features varying levels of granularity that leaves a beautiful glossy finish while achieving excellent resistance against wear and fracture.

T1000A is an uncoated high speed finishing grade designed with wear resistance in mind that provides long tool life and excellent wear resistance in continuous finishing and profiling applications.

[category] => turning [productdescimg] => pV> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => T1000A / T1500A Uncoated Cermet Grades [productexamplethird_name] => [productexamplethird_img] => ) [6] => Array ( [title] => SUMIPOLYGON Grooving System [alias] => sumipolygon-grooving-system [id] => 196 [tstamp] => 1679585015 [stop] => [start] => [invisible] => [language] => en [fallback] => 194 [materialproperties] => P,M,K,N,S,H [productteasertext] =>

Modular cassette grooving system

[productteaserimg] => +} [youtubevideoid] => [productcatalogname] => ISO-PSC Polygon [productcatalogfile] => ?]> [productcatalogthumb] => > [productcatalogshortdesc] =>

Grooving System

[productcatalogdid] => E-144 [productexamplefirst_name] => [productexamplefirst_img] => [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

Modular cassette grooving system

  • ISO PSC 40 / 50 base holder
  • Modular system with compact, stable design
  • Cassettes for soft and hard grooving (GND / TGA / CGA)
  • Repeatability of interface ± 2 μm
  • Internal coolant supply directly to the cutting edge
[category] => turning [productdescimg] => oV> [subcat] => tool-systems [pagemetatitle] => Details - Sumitomo [pagemetadesc] => ISO-PSC [productexamplethird_name] => [productexamplethird_img] => ) [7] => Array ( [title] => AC6000M Grades [alias] => ac6000m-grades [id] => 30 [tstamp] => 1672741689 [stop] => [start] => [invisible] => [language] => en [fallback] => 29 [materialproperties] => M [productteasertext] =>

AC6020M, AC6030M and AC6040M Coated Carbide Grades

[productteaserimg] => )QaT]> [youtubevideoid] => Q-3ifZwpuqQ [productcatalogname] => AC6000M Grades [productcatalogfile] => TU5> [productcatalogthumb] => z#SV> [productcatalogshortdesc] =>

Coated Carbide Grades

[productcatalogdid] => E-139 [productexamplefirst_name] => +70% Tool life [productexamplefirst_img] => )Qw> [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

Coated Carbide Grades

AC6000M Series offer grades for stainless steel cutting with excellent wear and fracture resistance.  

  • Absotech Platinum Technology
  • Extended tool life & reduced tool costs
  • Wide application range
[category] => turning [productdescimg] => d>$> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => AC6000M Coated Carbide Grades [productexamplethird_name] => [productexamplethird_img] => ) [8] => Array ( [title] => NGU Type Chipbreaker [alias] => ngu-type-chipbreaker [id] => 39 [tstamp] => 1667200895 [stop] => [start] => [invisible] => [language] => en [fallback] => 37 [materialproperties] => P,M,K,S [productteasertext] =>

NGU type chip breaker for positive inserts

[productteaserimg] => +QT]> [youtubevideoid] => Ddz7J_P53rA [productcatalogname] => NGU type chipbreaker [productcatalogfile] => 1> [productcatalogthumb] => V> [productcatalogshortdesc] =>

Chip breaker for positive inserts

[productcatalogdid] => E-166 [productexamplefirst_name] => [productexamplefirst_img] => [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

NGU type chip breaker for positive inserts

Newly developed NGU chip breaker for positive inserts enables a wide range of cutting conditions thanks to its wide chip pocket. The smooth and inclined plane of the chip breaker reduces cutting forces and prevents vibrations.

  • Available for wide range of conditions
  • Cutting force reduction and preventing chattering
  • Tough cutting edge
[category] => turning [productdescimg] => pbV> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => NGU type chip breaker for positive inserts [productexamplethird_name] => [productexamplethird_img] => ) [9] => Array ( [title] => AC4000K Grades [alias] => ac4000k-grades [id] => 9 [tstamp] => 1672738905 [stop] => [start] => [invisible] => [language] => en [fallback] => 8 [materialproperties] => K [productteasertext] =>

AC4010K AC4015K Grades for cast iron turning

[productteaserimg] => *]> [youtubevideoid] => zwocnRzX9DM [productcatalogname] => AC4000K Grades [productcatalogfile] => #3 _> [productcatalogthumb] => )_> [productcatalogshortdesc] =>

Coated grades for cast iron machining

[productcatalogdid] => E-147 [productexamplefirst_name] => +100% Tool life [productexamplefirst_img] => 3Jw> [productexamplesecond_name] => [productexamplesecond_img] => [productdescription] =>

Coated carbide grades

Newly developed grades for longer and stable tool life in machining of various cast irons - from grey cast iron (FC) to high-strength ductile cast iron (FCD).

  • High adhesion technology provides smooth cutting edge treatment for drastically improved peeling resistance
  • Crystal orientation control technology doubles crater wear resistance for high-speed machining
  • Special surface treatment achieves more than twice the compressive stress and 2x chipping resistance
[category] => turning [productdescimg] => *J]> [subcat] => grades-inserts [pagemetatitle] => Details - Sumitomo [pagemetadesc] => AC4010K AC4015K Grades for cast iron turning [productexamplethird_name] => [productexamplethird_img] => ) )