Drilling

Features

  • Smooth Diamond Coating with Sharp Cutting Edges
  • High Coating Adhesion due to Dedicated Substrate and Special Treatment
  • CFRP Dedicated Cutting Edge Design

 

Hole diameter accuracy, delamination, uncut fibers, chip evacuation, and other issues addressed. Also applicable to CFRP + multi-layered aluminum alloy.

Bore

SUMIDIA Coat

Dimensions

Diameter: ø2,0–20,0 mm

Overall Length: bis 200 mm;

Hole Depth (L/D): up to 8D

Recommended Cutting Conditions

vc: 80–150 m/min f : 0,05–0,1 mm/rev

 

Milling

Features

  • Optimised Rake and Relief Angles
  • Balance of cutting edge sharpness and tool life through small helix angle
  • With right-hand helix edge

 

Features

  • Right/left-hand helix prevents delamination on top and bottom surfaces
  • With a left-hand helix edge on the top and a right-hand helix edge on the bottom, fibers are held down during cutting, creating excellent surface quality