Drilling
SDC-SE Type - General-purpose 1st Recommendation
More details soon
SDC Type - Focus on Hole Quality
More details soon
SDC-WE Type - For CFRP/AI Focus on AI Machining Quality
More details soon
Features
- Smooth Diamond Coating with Sharp Cutting Edges
- High Coating Adhesion due to Dedicated Substrate and Special Treatment
- CFRP Dedicated Cutting Edge Design
Hole diameter accuracy, delamination, uncut fibers, chip evacuation, and other issues addressed. Also applicable to CFRP + multi-layered aluminum alloy.
|
Bore |
SUMIDIA Coat |
|
Dimensions |
Diameter: ø2,0–20,0 mm Overall Length: bis 200 mm; Hole Depth (L/D): up to 8D |
|
Recommended Cutting Conditions |
vc: 80–150 m/min f : 0,05–0,1 mm/rev |
SR Series - Indexable SumiReamer - Diameter: 7,6 - Ø 12,0 mm up
More details soon
Milling
SSDC Type - SUMIDIA Coated Endmills - General-purpose 1st Recommendation
More details soon
Features
- Optimised Rake and Relief Angles
- Balance of cutting edge sharpness and tool life through small helix angle
- With right-hand helix edge
SSDCRL Type - Recommended for Machining of Thin Plates
More details soon
Features
- Right/left-hand helix prevents delamination on top and bottom surfaces
- With a left-hand helix edge on the top and a right-hand helix edge on the bottom, fibers are held down during cutting, creating excellent surface quality
